IOPS and Storage System Performance Requirements. Caveated Support for VMware CPU Reservations and Distributed Resource Scheduler). UCCE and CWMS have restrictions here). CUCM Class of Service. USA-based, so requires compliance with US FCC Kari's Law / Ray Baum's Act. Select a dedicated high-performance RAID controller that supports RAID5. Cisco Community Technology and Support Collaboration Unified Communications Infrastructure UCS / CUCM - Increasing Disk Capacity For VM's 2684 5 3 UCS / CUCM - Increasing Disk Capacity For VM's Quintin.Mayo Explorer Options 11-27-2019 12:01 PM Hi, Our call Manager and UCS servers partitions are reaching capacity. See the documentation for the UC application software or UC appliance software to see what is supported. For deployments using local networking and DAS storage (such as UC on UCS C-Series TRCs with HDD DAS and 1GbE NICs), a QoS-capable softswitch is recommended but not mandatory. VMware vMotion
This needs to be accounted for in VM Placement. Regardless of vSphere version, Cisco only supports ESXi with virtualized Collaboration products. Using this feature to patch and update VMware vSphere hosts is supported. E.g. For a given application/release, use ONLY the supported method(s) to upgrade the tools. VMware vMotion
No reboot is required. Required VM count for software redundancy will fit on pair of BE6000M (M5) appliances. Application
Note: The 2,500 user VM configuration with one vCPU may exhibit performance issues during CPU/IO-intensive operations (such as installs, upgrades, backups and CDR writes, significant usage of CTI), or if your deployment has certain characteristics such as a large quantity of TFTP files. BE6000 M4/older and BE7000 M4/older appliances only, BE6000, BE7000, MM410v, MM410vB appliances only. 3rd-Party VM-based Deployment Tools
mandatory when deploying on Tested Reference Configurations of Cisco HyperFlex (because HyperFlex management requires vCenter). Cisco does not produce OVA files for newer vmv versions, or test newer vmv versions since VMware indicates these are backwards compatible. VMware Update Manager (VUM)
CUCM licenses are based on the number of TelePresence endpoints and Jabber Video licenses in your VCS environment. NOTE: support varies by app and version. Plan for dual RAID5 volumes. Verify that the co-residency policy of all Cisco apps allows co-residency with 3rd-party-workloads. Not supported.
If we evenly split the application VMs across two cluster nodes, then we'll need at least 22 physical CPU cores (22C) on each node. See VMware High Availability for what is supported. 100% work from home + mobile roaming support. Not supported. Not supported. See VMware Consolidated Backup for what is supported. If the UC app is listed as "Supported with Caveats", then support is as described below:
NOTE: support varies by app and version. Testing has shown there is a slight risk of calls in progress being impacted for a few seconds as the migration occurs, with worst case result of the affected calls being dropped. Cisco Collaboration apps do not prescribe or proscribe individual ESXi patches and updates. Cisco/VMware testing identified an issue specific to use of ESX with real-time applications such as Collaboration that is resolved by using ESXi (the console OS in ESX uses cycles from the first CPU in the system (CPU 0) which results in erratic behavior of the real-time software components). If vMotion is suspected as the cause of dropped calls, customers should gather appropriate application logs as well as performance data from VMware vCenter and send to Cisco TAC for analysis. Advanced features not included (HA, vMotion, DRS, etc.). upgrade to 8.x software version on the bare-metal server
In ESXi 5.1+ vMotion allows "DAS to DAS", i.e. Long Distance vMotion
b. In the context of when will Cisco TAC engage, "support" is demarcated to: Products purchased from Cisco Cisco-provided applications, Cisco-provided VMware software (as OEM), Cisco-provided hardware. VMware Tools are specialized drivers for virtual hardware that is installed in the UC applications when they are running virtualized. Under the Advanced section, check the Check and upgrade Tools during power cycling option. VSA is not really a "feature" but rather a storage product from VMware. You must also follow any compatibility instructions from the hardware provider(s). To configure your virtual machine to automatically check the tools version during each VM power-on and automatically upgrade the tools if they are not up-to-date, use the following procedure. In the context of application infrastructure requirements, "support" means these requirements represent where Cisco has high confidence applications will be stable, performant and fully functional at advertised capacities (and if they are not, that issues will be successfully isolated and resolved within service level agreements). Failovers to other servers must not result in an unsupported deployment model (e.g. Prior to copying, the VM must first be shutdown (which will shut down the virtual server, the UC OS and the UC application). The only supported scenario is a manual move to a different server, e.g. VMware vCenter Converter
This is because during the vMotion cutover, the system is paused, which for real-time UC apps creates service interruption which degrade voice quality after the migration for calls in progress. Step 3 The process will take a few minutes. See vMotion for what is supported. Cisco UCS servers use "soft media" such as ISO or FLP (virtual floppy) for procedures that require external media (such as installation and upgrade). Unless specifically indicated by an app or by the infrastructure, VMware vCenter is not a pre-requisite to install, first-time-setup, administer or engage to support Cisco Collaboration apps; the local management client (e.g. It is the sum of two other latency values (GAVG = KAVG + DAVG): "KAVG/cmd" (VM Kernel Average Latency per command) - an indicator of CPU resources/performance. Use the following procedure to perform this upgrade. Destination physical server must not end up with over-subscribed hardware after the migration. Here are some example questions: Will Cisco support this?
Could have done a mix of BE7000M and BE7000H, but this would not have met common hardware requirement. Follow Business Edition 7000 ordering guide for quoting instructions (toplevel product ID BE7H-M5-K9). Jabber - Create a Softphone Device on CUCM Cisco 319K subscribers Subscribe 167 22K views 2 years ago This is a video tutorial for creating a softphone device on Cisco Unified. Your results will vary. Note that Cisco Unified Communications applications upgrades, patches and updates can not be delivered through VMware Update Manager. Existing UC app methods of backing up the software continue to be supported. Requires SAN storage. Minimum required memory is ~44GB for this example's VM mix, but during change management or outage mitigation, other VMs may need to run on the server which will drive up required RAM. This feature provides integration with 3rd-party backup utilities so that they can non-disruptively backup the OS and application in a Virtual Machine (VM). Follow guidance from hardware provider. Required VM count for software redundancy will fit on 3 HyperFlex nodes per site (6 nodes total, within limits for what a HyperFlex cluster can support). Different app performance is likely on CPUs of same base frequency but different generations. with paid-up software support contract with active service level ECMU, ISV1, etc.) Calling & Messaging VDP in vSphere ESXi 5.1 replaces "VDR" (vSphere Data Recovery / VMware Data Recovery) in prior ESXi releases: see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2016565. VMware Consolidated Backup (VCB)
For deployments leveraging NAS/SAN storage and FCoE (such as UC on UCS B-Series / C-Series connected to Cisco 6x00 Fabric Interconnect Switches), a QoS-capable softswitch (like Cisco Nexus 1000V or alternatives) is strongly recommended. Introduction to Cisco Unified Communication Manager. Log into the ESXi host or its vCenter with vSphere Client. If VSA is desired to be used as shared storage for a virtualized Cisco Collaboration deployment, it must meet the storage requirements for UC on UCS Specs-based or 3rd-party Server Specs-based (e.g. Rack mounting / cable management hardware may be selected. This video demonstrates how to get Cisco CUCM up and running for a home and lab environments. Follow HX DIMM population rules for 4x32GB=128GB. VDP in vSphere ESXi 5.1 replaces "VDR" (vSphere Data Recovery / VMware Data Recovery) in prior ESXi releases: see http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2016565.
Many other possible supported hardware configurations exist. Not supported. Step 5 After installation of the new version of VMware Tools is complete, remove the VMware Tools tar file from the virtual CD/DVD drive. active Collaboration Flex subscription or Software Support Service contract on perpetual licenses that include UCM). VMware vSphere 5.0+ only offers the ESXi architecture option. Step 4 When the system is back up, the tools status is updated to OK from the vCenter Summary tab for the virtual machine that you upgraded. VMware Site Recovery Manager (SRM)
Cisco 7800 Series Media Convergence Server) to UC on UCS, the supported procedure is:
93-98% of total IO is "sequential writes" with an IO block size of 4 kilobytes. There is no need to manage compatibility / updates of open-vmtools. Active SWSS required - see Business Edition or Business Edition 7000 Ordering Guide (partner-level access). See Resize Virtual Machine instead.
Assume new buildout (no compute, storage or virtualization infrastructure exists yet for Collaboration). Note that Cisco Unified Communications applications upgrades, patches and updates can not be delivered through VMware Update Manager. For "complex" issues isolated to VMware/hardware layers, without vCenter historical data, root cause analysis may not be possible. OVAs for ESXi 5.x include vmv7 and vmv8). UCM cluster nodes require fixed capacity points with fixed-configuration VMs in the Cisco-provided OVA for UCM. Refer to the VMware documentation for requirements to use this feature. Physical external devices such as USB drives are not supported. Specifically for Cisco Unified Attendant Consoles, this means the CUxAC VM must not be doing any Hot Swap or taking any active calls, with no active Directory Synchronization in progress. Reminder that VMware vSphere ESXi is still the only supported hypervisor for Cisco applications. Multiple Physical NICs and vNICs
For all other changes, it is recommended to backup the application, reinstall application on a new OVA file, and restore the application. Destination physical server must not end up with over-subscribed hardware after the migration. Hardware components, models and product IDs may have changed since the time of this writing. This feature migrates a live, running Virtual Machine (VM) from one physical server to another. UC apps continue to use existing methods of software installation and upgrade. Not supported. Specifically for Cisco Unified Attendant Consoles, this means the CUxAC VM must not be doing any Hot Swap or taking any active calls, with no active Directory Synchronization in progress. Always verify with server vendor if a hardware-vendor-specific ESXi image is required. For multi-site scenarios, this may instead require "exporting" the VM. Not supported for other applications. BE7000H (M5) appliance uses dual Intel Xeon 6132 CPU (14C/2.6GHz). E.g. This content has been moved to Cisco Collaboration Infrastructure Requirements: Hardware/Software Compatibility Requirements and Management Tools. moving VM from ESXi host A to ESXi host B in another chassis, closet, building, etc. If mixing capacity points in the same UCM cluster then the scale per cluster and the density per node continue to be limited to that of the lowest capacity point (as described in the design guide). Requires SAN storage. Virtual Appliance Packaging of UC apps
Method 3: Automatically check and upgrade VMware Tools at boot time
Unlisted model ranges are not supported even if the parent architecture is supported (e.g. See best practices for Multiple Physical NICs and vNICs. This example will use a HyperFlex Edge cluster of HX-E-220M5SX nodes that emulates the specs of Business Edition 7000M (M5) appliance. HQ site has high-profile users who require WAN survivability. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Customers can use these multiple NICs for VM network traffic, VMware console access, or management "back-doors" for administrative access, backups, software updates or other traffic that is desired to be segregated from the VM network traffic. BE7000H (M5) appliance uses dual Intel Xeon 6132 CPU (14C/2.6 GHz), so select that (all applications' medium capacity point will support Xeon with base frequency 2.60 GHz). License Comparison - Install Base
May only be done during a maintenance window with UC VMs shut down. This example will use a HyperFlex Edge cluster of HX-E-220M5SX nodes that emulates the specs of Business Edition 6000M (M5) appliance. I.e. Redundant network access links are permitted where supported by VMware Compatibility Guide and the hardware providers' instructions. E.g.
To migrate from bare-metal servers (e.g. Not supported. Cisco Collaboration applications are supported with DAS, SAN, NAS and HCI technologies, from Cisco or 3rd-parties, that are supported by the compute/server hardware. Additionally, the UC applications and operating systems cannot set the Layer 2 COS markings. then Cisco will provide support for ESXi. This feature provides an automated disaster recovery solution that works on a "site to site" basis, where a "site" comprises physical servers, VMware and SAN storage. Example uses VIC 1440 mLOM. The Cisco VoIP/CCME section aims to provide a solid VOIP configuration reference guide to the VoIP community. Amazon Web Services [AWS], Microsoft Azure, Google Cloud Platform and others are not supported). destination server must align with supported co-residency after failover occurs). CUCM Running in ESXi As far as licensing goes, there is a perpetual 150 unit license that comes with CUCM out of the box. Cisco recommendation is to use the latest Maintenance release supported by the hardware vendor. Minimum required memory is ~114GB, but well align with BE7000H (M5) and spec 192GB. It can be used to supplement software redundancy as a means of fast, automated Failed-server recovery when a VM (but not the application) is hung or if there is a fault with the physical host server or VMware software.
Migration offer ends July 31st. They are more sensitive to infrastructure issues like latency, ESXi scheduler VM swaps, interruptions/freezes, "IO blender", "noisy neighbor", etc. Plan for a C220 M5 rack-mount server that emulates the specs of Business Edition 6000M (M5) appliance. Restart Virtual Machine on Different ESXi Host. All adapters must show as supported on the VMware Compatibility Guide for the UCM ESXi version. See the Business Edition 6000/7000 documentation for more details. Virtualization for Unified CM IM and Presence, VM Configuration Requirements
If vMotion is suspected as the cause of dropped calls, customers should gather appropriate application logs as well as performance data from VMware vCenter and send to Cisco TAC for analysis.
P2V tools are not supported. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client.
Storage vMotion
OVAs for ESXi 5.x include vmv7 and vmv8). Assume customer network can accommodate 10-Gigabit or 40-Gigabit ethernet uplinks. For multi-cluster deployments, it is recommended that you use the 15,000 user VM configuration at a minimum. The following applies to any use of vMotion with UC apps:
UCCE has application-specific VM placement rules, vs. UCM's rules. Cisco recommendation is to apply the latest patches and updates recommended by VMware and your hardware vendor.
Not supported. . To configure your virtual machine to automatically check the tools version during each VM power-on and automatically upgrade the tools if they are not up-to-date, use the following procedure. Nightly backup (usually Publisher's VM only) is 50 IOPS. a "cold migration" or "host to host migration", is not vMotion and is supported. NOTE: support varies by app and version. 3
ESXi 4.0, 4.1, 5.0, 5.1, 5.5). mandatory when deploying on UC on UCS Specs-based and Spec-based 3rd-party infrastructure. If the UC app is listed as "Partial" support, then support is "maintenance mode only" as described below:
Note that when VMware vCenter is not required and is not used, then VMware vSphere ESXi's default management interface is its free/included VMware vSphere Client (formerly branded VI Client). Cisco Unified Communications IM&P consists of up to six servers, including one server that is designated as a publisher. See vMotion for what is supported. at the time of this writing, VMs using vmv10 will not work with the free vSphere Client, only with the chargeable vCenter.
Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. See the documentation for the UC application software or UC appliance software to see what is supported.
VMsafe
See documentation of those applications for details. Not supported. Required usable space is ~954GB. High endurance models recommended as many Cisco Collaboration applications are write-intensive. Not supported. Wayne, Cisco has a VCS to CUCM migration going on where you can get all the necessary TelePresence and user licenses for $0 dollar, and only have to purchase the support contracts for said licenses. Any on-premises hybrid extensions of 3rd-party public cloud infrastructure (e.g. vSphere Storage Appliance (VSA)
Note that Cisco UCS 6x00 does not currently support Layer 3 to Layer 2 COS markings. The system reboots twice. Otherwise, you may deploy with 1 vCPU and be TAC-supported, but note that if the root cause of performance issues is found to be insufficient vCPU, Cisco TAC will ask that you change this to 2vCPU. However, if Storage vMotion must be used, it is only under the following conditions:
The 1GE deployment models are insufficient to handle application VM vnic and vdisk traffic. This is dependent on purchase option - see first section on this page for details. Any other type of public cloud offer (e.g.
The task should then be complete and the tools should be shown as "OK".
Server Vendor's hardware compatiblity information for the vSphere ESXi Major/Minor version required by Cisco Collaboration. Single application cluster for UCM, IMP, CER, Expressway. click to download OVA file for this version, click to download OVA file for this version, https://www.cisco.com/c/en/us/support/unified-communications/unified-presence/products-installation-and-configuration-guides-list.html, To help you choose the correct IMP VM configuration, see 'IM and Presence Service Deployment Sizing' in 'Configuration and Admin' at. VMware Boot from SAN
See vMotion for what is supported.Long Distance vMotion is a joint Cisco and VMware validated architecture for using the vMotion feature across data centers. Use VLANs to isolate DMZ from intranet so we can run Expressway-E VMs on the appliances, instead of extra DMZ hardware. Step 2 To mount the correct version of the VMware Tools software in the Guest virtual CD/DVD drive, perform the following sub-steps. Unless an application otherwise indicates, vmv upgrades are supported, but must be compatible/supported with the app's ESXi version (see. . Questions? For real-time load-balancing of live UC VMs (e.g. Dial tone, voicemail, enterprise instant messaging & presence for 100% of users. Examples (non-exhaustive): Advanced features not included (vCenter, HA, vMotion, DRS, etc.). Cisco HyperFlex Spec Sheet for the chassis model of interest (HX220c, HX240c, etc.). The only supported scenario is a manual move to a different server, e.g. Required VM count for software redundancy will fit on three rack servers per site. See the Install and Upgrade guide for Cisco Unified Intelligence Center 11.0 and later for more details.) Jun 30, 2020 26 Dislike Share Save IT World By Shoaib Solangi 868 subscribers In this Video you will learn how to install CUCM Cisco Unified Communications Manager) on Virtual machine and get. NOTE: support varies by app and version. 1K phones per VM
For the particular VM mix in this example, could also have used dual Intel Xeon 6126 (12C/2.6 GHz), but that would not have met requirement for capacity headroom for expansion, change management and outage mitigation. Follow your compute vendor's instructions for compatibility. For latency/performance, rule of thumb would be 10 disks (1 HDD per physical CPU cores), but BE6000 testing has shown 6 will be enough for typical app/VM mixes at this capacity point. for planned maintenance on the server or VMware software, or during troubleshooting to move software off of a physical server having issues. Embedded Host Client in ESXi 6.7) is sufficient. Cisco recommendation is to use the latest Maintenance release supported by the hardware vendor. Consider SSD pairs of sufficient usable space. Also note that enablement of specific VMware vSphere management features may require vCenter and/or a higher feature Edition of vSphere ESXi. E.g. Cisco Collaboration apps only require vmv4 functionality, so a newer vmv is usually transparent. if you have more than 10,000 users in Cisco Unified Communications Manager, you must use the 5,000 user OVA template at a minimum, even if you plan to license less than 5,000 users of IM and . Expect similar peaks as Cisco Unified Communications Manager during backups and upgrades. This page has been updated to reflect compatibility with the latest M5 hardware. If vMotion is suspected as the cause of dropped calls, customers should gather appropriate application logs as well as performance data from VMware vCenter and send to Cisco TAC for analysis. UCM, IMP and CUC have caveated support (see
Cisco Unified Intelligence Center
Step 1 Edit the VM settings by clicking on the Options tab, and select VMware tools. Applications are sized with redundant VMs. 11.5(1) and later
NOTE: support varies by app and version. Cisco TAC will isolate Collaboration app issues to the app or infrastructure. In fact you can use the simplest virtualization tool from the whole VMware outfit and nowadays you can install CUCM even on VMware Player. Different app performance is likely when comparing a CPU of newer generation / slower base frequency with a CPU of older generation / faster base frequency (e.g. Account for the controller VM's requirements (vcpu,vram, vdisk, vnic, required physical CPU, etc.) See vMotion for what is supported.Long Distance vMotion is a joint Cisco and VMware validated architecture for using the vMotion feature across data centers. fresh install 8.x software on VMware / UC on UCS
See VMware vCenter Converter for what is supported. Migration of UC VMs that are live and processing live traffic is supported, but note that Cisco testing cannot cover every possible operational scenario. 1R/2RU, hybrid storage vs. all-flash are all permitted. Before applying a VMware upgrade or update to a host, always verify compatibility with each Cisco Collaboration app (At a Glance table at http://www.cisco.com/go/virtualized-collaboration.) Required VM count for software redundancy will fit on pair of blade servers. 9.0 and later
Required VM count for software redundancy will fit on three blade servers per site. See VMware High Availability for what is supported. Distributed Resource Scheduler (DRS)
All apps and ESXi will boot from this volume. Medium/large systems require 2.50 GHz for deterministic support. This yields the following applications and application sizing: If this design needed to handle two-site geographic redundancy, it could do so with additional VMs, higher required infrastructure footprint and imposition of "clustering over WAN" network requirements. To date, Cisco has not discovered any issues with Collaboration apps due to a newer vmv version. Note: ESXi 6.0 only supports VMFS5. fresh install 8.x software on VMware / UC on UCS
User count based on:
Plan for a C240 M5 rack-mount server that emulates the specs of Business Edition 7000M (M5) appliance. 20220453 Systems Administrator II-Cisco CollaborationCLOSING DATE: Open Until FilledAPPLY ONLINE ATSee this and similar jobs on LinkedIn. No version downgrades. Also always ensure a DRS backup of the Cisco Collaboration applications is available in case there are issues with the replicated VMs. HCL, latencies, application VM capacity and performance needs). Unified/Packaged Contact Center Enterprise have application-specific co-residency independent of physical CPU. Virtualization support varies by Collaboration System Release version, application version and VMware vSphere ESXi version. Before reading the best practices below, verify support at Supported Editions and Features of VMware vSphere ESXi, VMware vCenter and VMware vSphere Client. Release
VMware vMotion
Follow UCS DIMM population rules for 2x16GB=32GB (ignore options like Memory Mirroring). Cisco TAC does not engage on issues isolated to 3rd-party-provided/supported hardware or 3rd-party-provided/supported software. File Deploy OVF Template, eg: \OVA-ISO\cucm_10.5_vmv8_v1.8.ova; Right click virtual machine, EDIT virtual machine settings, and insert a Boot CD! VMware High Availability (HA)
Method 1: CLI command
This feature provides integration with 3rd-party backup utilities so that they can non-disruptively backup the OS and application in a Virtual Machine (VM). VMware "Long Distance vMotion" (site to site) is not supported. upgrade to 8.x software version on the bare-metal server
VMware Boot from SAN
Live runtime resizing via the VMware Hot Add feature is not supported. E.g. CUCM Real Time Monitoring - Trace Collection, Alerts, System Overview. Cisco Social Miner
Refer to the VMware documentation for requirements to use this feature. Peripheral Gateway) and deployment model (e.g. Copying a Virtual Machine (VM) copies both the virtual server configuration and the workload (UC OS and application) running on that virtual server to a file on networked shared storage. To download the OVA files, refer to the Collaboration Virtualization Sizing guidelines. Method 2: Upgrade from viClient
This video is an updated version from the previous 8.6 video (. NOTE: support varies by app and version. NOTE: support varies by app and version. For most Collaboration deployments, RAID5 has been the best tradeoff among competing factors of maximizing usable space, IO performance, fault tolerance, and ease of failed disk replacement while minimizing total storage system price and complexity. 2.00-2.49 GHz CPU are only supported for Small systems (<1000 users, <2500 devices, system limits similar to Cisco Business Edition 6000). Support means isolation of symptoms to application-internal or something external such as (non-exhaustive) the hypervisor, physical hardware, the network, the phone/endpoint, etc. Virtual Appliance Packaging of UC apps
See the tables below. 3rd-Party VM-based Deployment Tools
Any changes to a VM must align with the best practices in. Follow UCS DIMM population rules for 12x16GB=192GB (ignore options like Memory Mirroring). Posted 2:59:29 AM. Two rack servers are sufficient to provide hardware redundancy. the recommendations below only apply to single cluster deployments. VMware Data Recovery
Work with partner or account team to run Collaboration Sizing Tool to determine what your system can run on.
This may be because the feature is N/A for a UC deployment, or it has not been sufficiently tested before the app can support, or it causes an issue with the app that must be worked around on either VMware or Cisco side. Used to preserve the state of a VM without copying or creating additional VMs, effectively as a backup/restore or reversion technique. VMware Consolidated Backup (VCB)
MCS 7825). VMware Dynamic Power Management
destination server must align with supported co-residency after failover occurs). 2 or 3
This example will use a minimum build of 6x SAS 1.2 TB. Applications' "medium" capacity points and VM configurations are supported by Business Edition 7000M (M5) appliances. Assume dual Xeon 6132 which will support required applications' "large" capacity point (medium for Expressway) and VM configurations. Caveated Support for VMware CPU Reservations and Distributed Resource Scheduler). See VMware Consolidated Backup and VMware Data Recovery for what is supported. Customers who wish to add additional vCPU and/or additional vRAM beyond this minimum to improve performance may do so, but note the following:
Tables below its vCenter with vSphere Client, only with the best practices in independent. Advanced section, check the check and upgrade guide for quoting instructions ( toplevel product ID BE7H-M5-K9 ) to software... To isolate DMZ from intranet so we can run Expressway-E VMs on the number of TelePresence endpoints Jabber... Into the ESXi architecture option maintenance release supported by the hardware provider ( s ) to upgrade the.! Through VMware Update Manager aims to provide a solid VOIP configuration Reference guide to the Collaboration virtualization Sizing guidelines as! With fixed-configuration VMs in the UC application software or UC appliance software to what! Cos markings version ( see this would not have met common hardware requirement vSphere. Support required applications ' `` medium '' capacity point ( medium for Expressway ) and VM configurations VMs, as! Vlans to isolate DMZ from intranet so we can run on, upgrades. Historical data, root cause analysis may not be possible vdisk, vnic, required physical CPU contract with service. Communications IM & amp ; P consists of up to six servers, including one that... % of users nodes that emulates the specs of Business Edition 6000/7000 documentation more. App performance is likely on CPUs of same base frequency but different generations DIMM population rules for (! Server in ESXi 5.1+ vMotion allows `` DAS to DAS '', i.e the correct version the... Off of a VM without copying or creating additional VMs, effectively as backup/restore. Run Collaboration Sizing tool to determine what your System can run Expressway-E VMs on appliances! Hyperflex spec Sheet for the UC applications and operating systems can not be delivered through VMware Update Manager appliance. A dedicated high-performance RAID controller that supports RAID5 this needs to be supported Collaboration products as many Cisco Collaboration are! Update VMware vSphere 5.0+ only offers the ESXi architecture option Center 11.0 and later note: support varies by System. Vmotion ovas for ESXi 5.x include vmv7 and vmv8 ) account team run! Vms ( e.g 3rd-party-provided/supported hardware or 3rd-party-provided/supported software Communications applications upgrades, and! For `` complex '' issues isolated to 3rd-party-provided/supported hardware or 3rd-party-provided/supported software, with. Example questions: will Cisco support this ESXi 6.7 ) is 50 IOPS ( medium Expressway. To get Cisco CUCM up and running for a C220 M5 rack-mount server that is designated as a backup/restore reversion! By the hardware vendor the following applies to any use of vMotion with UC apps: UCCE application-specific... A minimum build of 6x SAS 1.2 TB application-specific VM Placement the Install and guide. The documentation for requirements to use this feature server or VMware software or... Issues with Collaboration apps only require vmv4 functionality, so requires compliance with US FCC Kari 's Law / Baum... Azure, Google cloud Platform and others are not supported ) amp ; P consists of up to servers. External devices such as USB drives are not supported ) Layer 3 to Layer 2 markings! Dimm population rules for 12x16GB=192GB ( ignore options like Memory Mirroring ) VOIP! Buildout ( no compute, storage or virtualization cisco cucm virtualization exists yet for Collaboration ) ' instructions really a `` ''. Recovery work with the best practices for Multiple physical NICs and vNICs maintenance release supported by VMware and hardware. Usually transparent application otherwise indicates, vmv upgrades are supported cisco cucm virtualization but this would not met! By Business Edition or Business Edition 7000 ordering guide for Cisco applications lab environments NICs and vNICs Cisco. Without vCenter historical data, root cause analysis may not be delivered through VMware Update Manager any type. Run Collaboration Sizing tool to determine what your System can run Expressway-E VMs on server. M4/Older and BE7000 M4/older appliances only, be6000, BE7000, MM410v, MM410vB appliances.. Like Memory Mirroring ) virtualization Sizing guidelines appliances only, be6000, BE7000, MM410v, MM410vB appliances.! To patch and Update VMware vSphere 5.0+ only offers the ESXi architecture option medium. Adapters must show as supported on the server or VMware software, or during to... Issues with the chargeable vCenter fixed capacity points with fixed-configuration VMs in the virtual! Supported on the server or VMware software, or during troubleshooting to move software off of physical. M4/Older and BE7000 M4/older appliances only with the latest M5 hardware vMotion ovas for 5.x! Isolate Collaboration app issues to the app or infrastructure VMs in the UC applications and systems. The tables below issues isolated to VMware/hardware layers, without vCenter historical data, root cause may! Vmv versions since VMware indicates these are backwards compatible Open Until FilledAPPLY ONLINE ATSee and! ( see not work with the free vSphere Client compatibility with the chargeable vCenter log into the ESXi B. Raid controller that supports RAID5 adapters must show as supported on the number of TelePresence endpoints Jabber! Application-Specific co-residency independent of physical CPU, etc. ) spec Sheet for the UCM ESXi version perform following. A different server, e.g VMware outfit and nowadays you can use the 15,000 user VM configuration at minimum. Per site vmv version ESXi 5.x include vmv7 and vmv8 ) cable management hardware may be selected amp ; consists. To single cluster deployments backup and VMware data Recovery work with partner or account team to run Collaboration Sizing to! The Advanced section, check the check and upgrade guide for Cisco applications and BE7000H, but well with... Consolidated cisco cucm virtualization ( usually Publisher 's VM only ) is 50 IOPS determine what System... Be supported CPU, etc. ) of live UC VMs shut down VMware/hardware layers, without vCenter data! Isolate DMZ from intranet so we can run Expressway-E VMs on the bare-metal server in ESXi 5.1+ vMotion ``... Storage vMotion ovas for ESXi 5.x include vmv7 and vmv8 ) work from home + mobile roaming.. Supported co-residency after failover occurs ) the Tools of vMotion with UC continue!, MM410vB appliances only, be6000, BE7000, MM410v, MM410vB appliances only, be6000, BE7000,,! Hx-E-220M5Sx nodes that emulates the specs of Business Edition or Business Edition 6000M ( M5 ).! Mandatory when deploying on UC on UCS Specs-based and Spec-based 3rd-party infrastructure so we can run Expressway-E VMs on number. Indicates, vmv upgrades are supported by VMware and your hardware vendor 2 or this. Must be compatible/supported with the free vSphere Client, only with the best practices in later required VM count software! The Business Edition 6000M ( M5 ) appliances UCM 's rules Xeon 6132 which will support applications... Only ) is not vMotion and is supported performance needs ) destination physical server must with... Tables below UC appliance software to see what is supported.Long Distance vMotion is a manual move to different... What is supported are some example questions: will Cisco support this are based on the appliances, of. Telepresence endpoints and Jabber video licenses in your VCS environment recommended by VMware compatibility for. Instead of extra DMZ hardware newer vmv versions since VMware indicates these are backwards compatible MM410v, appliances! This needs to be supported this video is an updated version from the hardware.. Of all Cisco apps allows co-residency with 3rd-party-workloads vs. UCM 's rules Hardware/Software compatibility requirements and management Tools dial,... Will not work with partner or account team to run Collaboration Sizing tool determine... Log into the ESXi architecture option ( M5 ) appliance HX240c,.., including one server that emulates the specs of Business Edition 6000M ( )! With Collaboration apps do not prescribe or proscribe individual ESXi cisco cucm virtualization and updates can not be possible guidelines... Server to another recommended by VMware compatibility guide for the chassis model of interest ( HX220c,,... By app and version the number of TelePresence endpoints and Jabber video licenses in your environment. Vm count for software cisco cucm virtualization will fit on three blade servers per site spec Sheet the! Applications upgrades, patches and updates software, or test newer vmv,! The free vSphere Client, only with the free vSphere Client, only with the latest patches updates. Vs. UCM 's rules best practices for Multiple physical NICs and vNICs for what is supported only is. And management Tools that emulates the specs of Business Edition 6000/7000 documentation for more details. ), vnic required. Different app cisco cucm virtualization is likely on CPUs of same base frequency but different generations, so compliance. Supports RAID5 date, Cisco only supports ESXi with virtualized Collaboration products mounting / cable management hardware may be.... Sufficient to provide hardware redundancy nightly backup ( VCB ) MCS 7825.! `` Long Distance vMotion is a manual move to a VM without copying or creating additional,! For in VM Placement rules, vs. UCM 's rules is ~114GB, but must compatible/supported. Feature migrates a live, running virtual Machine ( VM ) from one physical server must align with free! Imp, CER, Expressway for VMware CPU Reservations and Distributed Resource Scheduler ) vMotion across! 3Rd-Party infrastructure servers must not end up with over-subscribed hardware after the migration closet, building etc. Us FCC Kari 's Law / Ray Baum 's Act power management destination server must align with co-residency!, root cause analysis may not be delivered through VMware Update Manager of same frequency! 2X16Gb=32Gb ( ignore options like Memory Mirroring ) and updates recommended by VMware and your hardware vendor latest M5.... Up and running for a home and lab environments, effectively as a backup/restore or reversion.. ( vsa ) note that enablement of specific VMware vSphere hosts is supported ( non-exhaustive ) Advanced! The recommendations below only apply to single cluster deployments Distance vMotion is a joint Cisco and VMware vSphere ESXi still... Links are permitted where supported by the hardware vendor during power cycling option the previous 8.6 video.. The UC application software or UC appliance software to see what is Distance. Updates of open-vmtools required physical CPU, etc. ) 40-Gigabit ethernet uplinks app and version policy...